top of page

A versatile wire feed welder capable of operating on either 115V or 230V input power. Welds up to 3/8 in. mild steel, spool gun ready for aluminum and is flux-cored or MIG ready.​



  • Comfortable 10 ft. (3m) HR-100 gun
  • Owner's manual with installation, operation and maintenance guidelines.
  • 10 ft.(3m) work cable with clamp
  • Built-in gas solenoid value and dual-gauge regulator with gas hose
  • Spool hub assembly accommodates 4 or 8 in. spools
  • Sample spool of .030 in. self-shielding flux-cored wire
  • .030 (0.8mm) contact tips
  • Quick Select™ drive roll for .024 in. (0.6 mm) or .030/.035 in.
  • Power cord with 5-15 P (115 V, 15 A) and 6-50 P (230 V, 50 A) MVP (TM) plugs
  • Welding guide and material thickness gauge


Max 210 amps in small portable case

Sized for you to easily transport the unit to the jobsite with the power to weld 3/8 in. mild steel.

7 (230 V) and 4 (115V) voltage settings, with infinite wire feed speed control

Allows you to fine control the output parameters for improved arc performance with less spatter for a better bead appearance and less clean up.


Accepts uncomplicated, simple-to-install direct plug-in SpoolRunner 100 spool gun


Allows you to weld aluminum with enhanced feed ability and reduction of “bird-nesting.

Integrated spool gun control circuitry is standard eliminates your need for an additional control box or adaptor to connect the SpoolRunner 100 spool gun.


Dual-voltage capability with MVP (multi-voltage plug)

Allows you to connect to common 115 or 230 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle.


Door Chart with initial settings

You are able to quickly reference initial settings for different wires, gases, materials, and thicknesses. Provides you a quick starting point whether you are a novice or professional.


Built-in contactor

Keeps wire electrically “cold” until trigger is pulled which gives you ease of use and keeps you safe.

Industrial cast aluminum wire drive system


Durable wire feed provides you professional performance


Convenient polarity changeover

Easier and quicker for you to change polarity between solid or tubular wire.


Quick Select drive roll

Less of your time consumed in setup by offering three grooves – two for different size solid wire and a third for flux-cored wire.


Short circuit protection

Protects unit against current overload.

Self- resetting thermal overload protection

Protects power transformer from thermal overload to provide you maximum reliability.


Current-limited motor protection

Protects wire feed system from overload, you won’t need to change or reset the circuit breaker button.

      HOBART Handler® 210MVP MIG Welder

      SKU: 500553
        bottom of page